So
now you have all the wallpaper covering up your tapewire and you want
to install some lamps in your roombox or dollhouse. But with the
wallpaper in place you can no longer see the tapewire so how do you
find it?? It is really easy. We did a couple of things way back when
we started to make this step easier. Remember that line I had you
draw all around your room? The one I told you to center your tapewire
on when you applied it. That was one of the things we did to make
finding the wire easier. That combined with those pictures I told you
to take of the wiring will give you a pretty good idea of where that
tapewire runs along the wall. Now we just need to use the test probe
that came with our wiring kit to get a precise placement. Just gently
poke the prongs of the prob into the wallpaper where you are fairly
certain the tapewire is (you will need to have the wiring system
plugged in to do this) and when the probe lights up you know you have
found your tapewire. On a wooden structure I suggest using a pencil
to mark where the holes from the test probe are so they are easier to
find again. Now you just need to make holes for either your brads or
grommets and install your fixture. See I told you this was an easy
step (as long as you followed the steps earlier in the process)
No comments:
Post a Comment